Auzendin Marka Auzentech Sadece Mavi Bilgisayarda

Auzentech'den profesyonellere yönelik ses kartı



Auzen X-Tension? DIN sayesinde bilgisayarınızı ses stüdyosuna çevirin!
MIDI inve out çıkışı sayesinde artık stüdyonuz hazırEkstra mikrofon çıkışı ile çift mikrofon bağlamaya hazır Dijital in/out 24-bits/192 kHz çözünürlük Optik ya da coaxial çıkış Herşeyi dijital duymak ve kaydetmek istiyorsunuz İşte aradığınız ürün
SADECE AUZENTECH X-FI PRELUDE UYUMLUDUR
Gallery
X-FI prelude kartlara DIN kablosu takılmaktadır
Click image to enlarge in new a window




X-Tension DIN with cables attached (above)
All cables are included See below
Click image to enlarge in new a window



DIN kablo bağlantısının nasıl yapıldığını görmek için aşağıdaki linke tıklayınız
Click image to enlarge in new a window



X-Tension DIN Package Contents (above)
Data cable for connecting soundcard (top left), Auzen X-Tension DIN board (top right),
Data cable for transferring microphone input to soundcard (bottom left),
User Guide including Warranty Card (bottom middle), MIDI cable (bottom right)
Note Not to scale All items have a quantity of one (1)




Compatible digital speakers from Creative Labs?
Connect to the G9 Digital Multi Out jack
For list, see Compatibility

Features



X-Tension DIN Connectors (above)
Click image to enlarge in new a window

Mic In The input for dynamic-microphone In total, three microphone inputs are available (Microphone input of the soundcard, FP_AUDIO, Auzen X-Tension) When the jumper switch 9 is set to ?ON, this input changes to a condenser microphone input that supports 5V power (Caution "Phantom power" is not supported Do not use a phantom microphone)
MIDI In 16 channels of MIDI signal input
MIDI Out 16 channels of MIDI signal output

Digital In Supports coaxial and optical input
Digital Out Supports coaxial and optical output
G9 Digital Multi Out Output supporting 24Bit 96kHz LPCM or PCM 8ch Compatible with digital speakers from Creative Labs?
EXT_MIC Connector Transfers microphone input data Used with the 4pin-4pin cable to connect to the soundcard
Data Cable Connector Used to connect the soundcard and Auzen X-Tension DIN
Jumper 1 Default setting is ?OFF for dynamic microphone When set to on ?ON, 5V will be provided to the microphone input for use with a condenser microphone
Jumper 2 This jumper is related with the type of digital signal For the X-Meridian, set this jumper to ?OFF' Other settings may be appropriate for future soundcards

Specifications


Mic Preamplifier
1) Peak level 0dBFS @ -40dBV
2) Gain Adjustment Gain +20dB up
3) 5V power supply (Condenser Mic)
4) Connector Type 1/4" TRS Input
MIDI I/O
1) 1-in, 1-out 16 MIDI channels in and out
2) Connector Type MIDI Standard MIDI 5-pin DIN
Digital In
1) Connector Type RCA or Optical Combo
2) Format IEC-60958 Consumer(S/PDIF)
3) Sampling Rate441,48,96,192kHz
4) Resolution 24-bit
Digital Out
1) Connector Type RCA or Optical Combo
2) Format IEC-60958 Consumer(S/PDIF)
3) Sampling Rate441,48,96,192kHz
4) Resolution 24-bit
G9 Digital Out
1) Connector Type 9-pin Mini Din Jack
2) Format IEC-60958 Consumer(S/PDIF)
3) Sampling Rate441,48,96,192kHz
4) Resolution 24-bit
Compatibility
The X-Tension DIN is to be used with the following list of soundcards and devices Select future Auzen soundcards will be compatible with the X-Tension DIN

Auzen X-Fi Prelude

Midi In, Midi Out, and SPDIF Out Compatible
Mic In, SPDIF In, DIN Not Compatible

Please read the X-Tension DIN Installation Manual for the X-Fi Prelude before purchasing the X-Tension DIN
Soundcard User Manuals Page

See announcement about these incompatibilities


Auzen X-Meridian 71


Digital speakers from Creative Labs? via the G9 Digital Multi Out jack


Cambridge Soundworks Digital Desktop Theater 51 DTT2500

Cambridge Soundworks FPS2000 Digital Speakers

Cambridge SoundWorks DTT 3500 Digital 51 Surround Speaker System

Creative Inspire 51 5700 PC multimedia home theatre speaker system