ForumSinsi - 2006 Yılından Beri

ForumSinsi - 2006 Yılından Beri (http://forumsinsi.com/index.php)
-   Mühendislik / Mimarlık / Peyzaj Mimarlığı (http://forumsinsi.com/forumdisplay.php?f=592)
-   -   Ekonomik Lambaların Şemaları (http://forumsinsi.com/showthread.php?t=932687)

Prof. Dr. Sinsi 10-15-2012 12:46 AM

Ekonomik Lambaların Şemaları
 

ekonomik lambaların şemaları..

http://frmsinsi.net/images/forumsins...sinsi.net_.jpg

http://frmsinsi.net/images/forumsins...sinsi.net_.jpg

Introduction
Compact fluorescent lamps have some benefits in comparison with classic light bulbs. It is lower power consumption (to 80%) and much longer lifetime (5 to 15 times). Disadvantages are longer starts mainly at more expensive types, impossibility to use darker and price.

http://frmsinsi.net/images/forumsins...sinsi.net_.jpg

Lamp start
R6, C2 and DIAC mades first pulse to base of transistor Q2 and cause his opening. After start is this section blocked by diode D1. After every opening of Q2 is discharged C2. There is not possible to collect enough energy for reopening of diac. Next are transistors excitated over very small transformer TR1. It consists of ferrite ring with three windings (5 to 10 coils).
Now are filaments powered over capacitor C3 from voltage rises from resonant circuit from L1, TR1, C3 and C6. Than the tube lights up is resonation frequency specified by capacity of C3, because he has much lower capacity than C6. In this moment is voltage on a C3 over 600V in a relation to used tube. During start is peak collector current about 3 to 5 times bigger than during normal operation. When the tube is damaged, there are hazard of transistor destroying.

http://frmsinsi.net/images/forumsins...sinsi.net_.jpg

http://frmsinsi.net/images/forumsins...sinsi.net_.jpg

Isotronic 11W
Lamp Isotronic 11W use a little modified wiring, where doesn't exists starting circuit with a diac. Lamp starts probably thanks to capacitor C1.

http://frmsinsi.net/images/forumsins...sinsi.net_.jpg

Luxtek 8W
Lamp Luxtek 8W use classic wiring with a small changes. Interesting is only thermistor, which probably makes light start and filament preheating.

http://frmsinsi.net/images/forumsins...sinsi.net_.jpg

http://frmsinsi.net/images/forumsins...sinsi.net_.jpg

Maway 11W
Lamp Maway 11W use different wiring too like Isotronic lamp.

http://frmsinsi.net/images/forumsins...sinsi.net_.jpg

http://frmsinsi.net/images/forumsins...sinsi.net_.jpg

http://frmsinsi.net/images/forumsins...sinsi.net_.jpg

http://frmsinsi.net/images/forumsins...sinsi.net_.jpg

PHILIPS ECOTONE 11W
Lamp PHILIPS ECOTONE 11W use again simplified wiring like a Isotronic lamp.

http://frmsinsi.net/images/forumsins...sinsi.net_.jpg

http://frmsinsi.net/images/forumsins...sinsi.net_.jpg



Powered by vBulletin®
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.