Zura-104 Marka Thermalright
 

Thermalright HR-07 Ram Cooler ile Ram lerinizi en iyi şekilde soğutabilir bu sayede stabiliteyi arttırabilirsiniz.



Özellikler

Çift ısı borusu ve çift ram sink sayesinde çok daha iyi soğutma
Özel havalandırma kanalcıkları sayesinde alüminyum kanatlar arasından ram in ısısı çok başarılı bir şekilde tahliye edilerek çok yüksek overclock değerlerine ulaşma imkânı verilir
Tüm bellek tipleri ile uyumlu (bakınız uyumluluk)
Kolay montaj, ekstra aparat gerektirmez
Opsiyonel olarak istenirse fan takma imkânı
Dual Channel kullanım desteği
Teknik Veriler
BoyutlarL150 x W27 x H86 mm (Heatsink sadece)
Ağırlık150g (Heatsink Only)
Tavsiye edilen fanlar (isteğe bağlı gerekli değil)70mm ,80mm ,92mm Fan

Uyumluluk
DDR1 DDR2 Tek taraflı modül çift taraflı modül
(ana kart ram slotunda"Dimm Slot 13 " "Dimm Slot 24" DualChannel kullanım imkânı)
AC_FL_RunContent//download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,29,0','width','600','heigh t','215','src','../../../product_images/ram_cooler/hr07/hr07_banner','quality','high','pluginspage','http//www.macromedia.com/go/getflashplayer','movie','../../../product_images/ram_cooler/hr07/hr07_banner' ); //end AC code


Installation Guide HR-07

Installation


- DETAILS -



Details drawings


Disclaimer
Thermalright or its owners or partners is not responsible for damage or loss of any kind that may occur as a result of using or misusing this or any product we manufacture. Use common sense and review all product details prior to use. Ask a question


Single-sided memory module Installation Guide
- STEP 1-

- STEP 2-

Clean the surface of memory module in preparation for application of adhesive tapes.


Extract from the accessory pack two thermal adhesive pads; one thin and one thick.



- STEP 3 -

- STEP 4 -

Stick the thinner pad to the side that has the memory chips and the thicker pad to the other side.


Align the memory module to the opening of the heatsink's clip and carefully slide the module into the clip.



- STEP 5 -

- STEP 6 -

Then push the memory module all the way in.

Whichever Dual Channel combination you choose; 13 or 24, insert the memory module with the heatsink attached into the memory slot closest to the CPU heatsink first


Memory module Fan Installation
- STEP 1-

- STEP 2-

Select the screws in accordance to the size of your chosen fan.


Install the four pieces of fan adapter on the HR-07 as shown in the picture.



- STEP 3 -

STEP 4-
Place the fan on top of HR-07 and insert the selected screws through the fan mounting holes to align the screws to the holes on the arm plate. Tighten the screws to secure in place.


Installation Complete.
Awards Accolades Find out why we are the best.MetkuMods
NightModders PoleCamy AwardBigBruin Highly Recommended Award
LegionHardware "Must Have Hardware"Madshrimps Gold Novelty AwardXSReviews

Tweak.dk

PCTuner.net (Italian)

Overclockersonline.net