Samsung Wave 533 Ve Diğer Akıllı Telefonların Daha Uzun Süre Pil Kodu

**Prof. Dr. Sinsi** · 08-01-2012

İyi Günler Arkadaşlar Ben Yabancı Bi Siteden Aldığım Yazıya Göre Pilin Ömrünü %20 Daha da Artıran Yani Çalar Saat İçin Felan Ayrılan Pil Ömrünü De Kullanmaya Yarayan Kodu Buldum Buyrun kod : *#8740#
Ayrıca Sonradan Farkettimde Telefonu Pc ye Bağlarken Telefonun Çoğu Zaman BAğlanamadığı Sorunları Da Kaldırıyor ben pc ye 1 haftadır telefonu bağlayamıyordum şimdi bu kodtan sonra Telefonum Işık Hızında Bağlanıyor Süper Bence
Orjinal alıntı

THE CODE FOR LONGER BATTERY LIFE - Everyone should check this on ur Wave

There is a battery problem with the Wave

To Overcome this Issue, key this code on the phone's keypad *#8740# Then, your phone should display AP UART Enabled

If it displays CP UART it means that it was set wrongly at the factory, and WILL drain the battery

If phones displayed "CP UART" Please Key same code again ( *#8740# ) then it will Display "AP UART Enabled"

WORKED 100% WITH ME AS MY FACTORY SETTING ALSO WAS "CP UART"

============================== ============================== ======================
INFO ADDED FOR CONVENIENCE OF MEMBERS
============================== ============================== ======================Quote from: Jainendra on February 20, 2011, 05:29:50 PM
Basic differences between CP-UART and AP-UART :

CP-UART :
1

It runs the whole system in aggressive CPU mode where all the CPU and RAM is utilised by the OS and hence giving battery drain

2

In this mode you will rarely notice any lags or memory low issues

3

Perfect for Gaming and HD video recording

4

It gives most fluid UI experience

AP-UART :
1

This is the conservative mode of the CPU when system runs in low-resource mode

Less CPU and little less RAM and hence better battery life

2

Your Games could lag and you might experience sudden jerks in UI

3

Might have impact on your Data speed

4

Low memory issues possible

In real-life situation you might rarely notice the differences cause :
1

BADA by design is low on resources

2

We still don't have very CPU-intensive code (Apps/Games) or Graphics

3

With Bada 1

2 memory management has improved a lot

I hope many will agree

It should be selected based on these parameters :
1

What exactly you want to do with your device ? Gaming, Multitasking, HD video recording or just normal browsing, E-mails, Messaging, Calls, etc

Everybody has different needs

2

How often you are comfortable charging your battery ?
3

Will you be able to charge your battery during your travels, etc ?

I have set it to AP but when I need to play some Graphic intensive game (I do it only for testing purposes otherwise no games for me) I switch it to CP and reboot

Hope it might help !

Good luck n keep smiling ! ! !

Konu Araçları	Bu Konuda Ara
Yazıcı Çıktısını Göster Sayfayı E-posta ile Yolla	Bu Konuda Ara: Gelişmiş Arama
Görünüm Modları

08-01-2012	#1
Prof. Dr. Sinsi	Samsung Wave 533 Ve Diğer Akıllı Telefonların Daha Uzun Süre Pil Kodu İyi Günler Arkadaşlar Ben Yabancı Bi Siteden Aldığım Yazıya Göre Pilin Ömrünü %20 Daha da Artıran Yani Çalar Saat İçin Felan Ayrılan Pil Ömrünü De Kullanmaya Yarayan Kodu Buldum Buyrun kod : #8740# Ayrıca Sonradan Farkettimde Telefonu Pc ye Bağlarken Telefonun Çoğu Zaman BAğlanamadığı Sorunları Da Kaldırıyor ben pc ye 1 haftadır telefonu bağlayamıyordum şimdi bu kodtan sonra Telefonum Işık Hızında Bağlanıyor Süper Bence Orjinal alıntı THE CODE FOR LONGER BATTERY LIFE - Everyone should check this on ur Wave There is a battery problem with the Wave To Overcome this Issue, key this code on the phone's keypad #8740# Then, your phone should display AP UART Enabled If it displays CP UART it means that it was set wrongly at the factory, and WILL drain the battery If phones displayed "CP UART" Please Key same code again ( #8740# ) then it will Display "AP UART Enabled" WORKED 100% WITH ME AS MY FACTORY SETTING ALSO WAS "CP UART"* ============================== ============================== ====================== INFO ADDED FOR CONVENIENCE OF MEMBERS ============================== ============================== ======================Quote from: Jainendra on February 20, 2011, 05:29:50 PM Basic differences between CP-UART and AP-UART : CP-UART : 1 It runs the whole system in aggressive CPU mode where all the CPU and RAM is utilised by the OS and hence giving battery drain 2 In this mode you will rarely notice any lags or memory low issues 3 Perfect for Gaming and HD video recording 4 It gives most fluid UI experience AP-UART : 1 This is the conservative mode of the CPU when system runs in low-resource mode Less CPU and little less RAM and hence better battery life 2 Your Games could lag and you might experience sudden jerks in UI 3 Might have impact on your Data speed 4 Low memory issues possible In real-life situation you might rarely notice the differences cause : 1 BADA by design is low on resources 2 We still don't have very CPU-intensive code (Apps/Games) or Graphics 3 With Bada 12 memory management has improved a lot I hope many will agree It should be selected based on these parameters : 1 What exactly you want to do with your device ? Gaming, Multitasking, HD video recording or just normal browsing, E-mails, Messaging, Calls, etc Everybody has different needs 2 How often you are comfortable charging your battery ? 3 Will you be able to charge your battery during your travels, etc ? I have set it to AP but when I need to play some Graphic intensive game (I do it only for testing purposes otherwise no games for me) I switch it to CP and reboot Hope it might help ! Good luck n keep smiling ! ! !